Arduino Uno Compatible Starter Kit

Description

Overview

This is a useful development kit to get your world of coding and hardware development.

It can be used with any other development board.

This kit contains the following components:

1)      1 x Arduino Uno R3 Board +1 x USB cable(0.5m Length)

2)      1 x GPIO Extension Board + 1 x Connecting Cable

3)      1 x Breadboard(830 Points)

4)      1 x Mini Breadboard+1 x Extension board

5)      10 x 3mm Red LEDs

6)      10 x 3mm Green LEDs

7)      10 x 3mm Yellow LEDs

8)      1 x 5mm RGB LED

9)      5 x Button with Cap

10)  10 x 330 ohm Resistor

11)  10 x 1k ohm Resistor

12)  10 x 10k ohm Resistor

13)  1 x 1K Adjustable Trim Pot Resistor (Potentiometer)

14)  1 x 10K Adjustable Trim Pot Resistor (Potentiometer)

15)  1 x 2.54mm Elbow 40 Pin Header

16)  1 x 2.54mm Straight 40 Pin Header

17)  1 x 5516 LDR (Photoresistor)

18)  1 x Ball switch

19)  1 x Active Buzzer 5V

20)  1 x Passive Buzzer 5V

21)  1 x 74HC595 8bit Shift Register

22)  1 x LM35 Temperature Sensor

23)  1 x SS8050 NPN Transistor

24)  1 x 1838 Infrared Receiver

25)  1 x Infrared Sender

26)  1 x Infrared Phototransistor(Flame Sensor)

27)  1 x Infrared Remote controller(Battery Not Included)

28)  1 x Stepper Motor

29)  1 x SG90 Servo motor

30)  1 x 1602 LCD

31)  1 x 1-Digit Eight-segment Display

32)  1 x 4-Digit Eight-segment Display

33)  1 x 8*8 Dot Matrix Led Display

34)  1 x Stepper Motor Driver Board

35)  1 x Sound Sensor Module

36)  1 x PS2 Joystick module

37)  1 x RTC module(Battery Not Included)

38)  1 x Relay Module(5V-10A)

39)  65 x Jump Wires

40)  10 x Female-Female Dupont wires

41)  10 x Male-Female Dupont wires

42)  1 x 9V Battery Holder(Battery not included)

43)  1 x HC-SR04 Module